Wellhead kit
AFK5-65×21 (14.35) K1 (K2) -06KU
TU 3665-009-4965 2808-2004
The set is intended for sealing the wellhead of oil wells, regulating their operation mode, installing and connecting devices for examining wells and carrying out technological operations.
The wellhead kit is equipped with reliable, easy-to-operate and high-tight ZD valves. The lack of free volume in valves of this type excludes the possibility of water ingress and freezing in the valve body. The alloys and materials used provide high wear and corrosion resistance.
The kit is intended for use in wells with a high paraffin content.
The climatic version of the wellhead fittings is UHL1 (HL1) in accordance with GOST 15150-69.
The limiting values of the operating temperatures of the ambient air are from +40 to -60 ° С.
By agreement with the customer, any design and configuration options are possible.
 |
||
| 1. Choke valve ZDSH 65x210M
2. Gate valve ЗД 65-210М 3. Crosspiece 4. Crosspiece 5. Quick disconnect connection 6. Quick disconnect connection (with non-return valve) |
7. Valve sampling taker
8. Manometric valve 9. Gate valve (steaming) 10. Check valve 11. Manometer 12. Sub |
13. Cable entry
14. Tee 15. Counter flange |
| Specifications | ||
| Working pressure Pn, MPa (kg / cm²) |
14(140), 21(210), 35(350) |
|
| Nominal bore Dn, mm | Tree trunk |
65 |
| Side track (lateral outlet) |
65 |
|
| Side outlets of the pipe head |
65 |
|
| Connecting thread | To tubing (lift) pipes | NKT73, NKT89, NKT102, NKT114
GOST 663-80 |
| Resistance to downhole environment | K1, K2 GOST 13846-89 | |
| Working environment temperature, ° C | No more than 120 | |