VM5x35
The BM5 valve is designed to connect manometer, as well as to provide the ability to dismantle the manometer in the presence of pressure in the wellhead.
Valves without a separator can be used as shut-off devices on wellheads or pipelines.
Benefits:
- gate ВМ5х35 is made of corrosion-resistant steel, which makes it resistant to corrosive downhole media
- allows you to replace the pressure gauge without relieving pressure from the main line
- allows you to dismantle the medium separator without relieving pressure from the main line to fill it with oil
- lightweight and easy to operate
Macroclimatic areas of operation – moderate and cold in accordance with GOST 15150.
| Specifications | |
| Working pressure, MPa (kg / cm2), no more |
35 (350) |
| Connecting thread, mm | see picture |
| Separating liquid volume, cm³ (for valves with medium separator) |
5…6 |
| Leakage class according to GOST 9544 |
А |
| Weight, kg |
1,2 |
|
Scheme 5×35
|
| 1. Spindle unit 2. Medium separator 3. Nut 4. Gasket 5. Body 6. Plug 7. Gasket 8, 9. O-ring 10. Nut 11. Washer 12. Ball 13. Flywheel |
|
Scheme 5×35-01
|
| 1. Spindle assembly 3. Nut 4. Gasket 5. Body 6. Plug 7. Gasket 8, 9. O-ring 10. Nut 11. Washer 12. Ball 13. Flywheel |
|
Scheme 5×35-02
|
| 1. Spindle unit 2. Medium separator 3. Nut 5. Body 6. Plug 8, 9. O-ring 10. Nut 11. Washer 12. Ball 13. Flywheel |
|
Scheme 5×35-02-01
|
| 1. Spindle assembly 3. Nut 5. Body 6. Plug 8, 9. O-ring 10. Nut 11. Washer 12. Ball 13. Flywheel |
|
Scheme 5×35-03
|
| 1. Spindle assembly 3. Nut 5. Body 6. Plug 7. Gasket 8, 9. O-ring 10. Nut 11. Washer 12. Ball 13. Flywheel |
